[KONDO] Stone Chipping Chisel (D=25mm Bits=9mm*12mm, embed) [KMF100203]

It is a stone chisel for chipping. It is used at the masonry work, architecture and gardening. Stone Chipping Chisel of this size (Diameter=25mm Carbide bits=9mm*12mm / Digs deep) becomes slightly large size also in lineup. Work narrower than 30 mm one and 28mm one is possible.
A hole is made in the tip portion of steel and carbide is fixed by brass brazing. The main uses are chipping of a stone. It is used for the place which likes a coarse result. Since it respects the directions as it which people probably purchased are good and know, a detailed description is omitted. However, you should make the following point careful.

Please adjust an angle in Aoto of the GC whetstone 120H according to the stone to be used before beginning to use. When using it for soft stones, such as the Shirakawa stone and an Oya stone , it is about 60 degrees. In the case of granite, it is common to adjust to an obtuse angle rather than 55 degrees.

If you are a professional, the optimal SETTO for Angle picking Chisel of this size (Diameter=25mm Carbide bits=9mm*12mm / embed) is a 1.0 to 1.3 kg thing. However, when there is little experience, please use SETTO lighter than this.

The main use
Stone chipping
For Art (Sculpture), Architecture, Landscape design, Garden, Repair the ruins ,etc.

It will be necessity about five business day to send.

About a maker, Kondo Masonry tools factory (AICHI pref)

This Stone Chipping Chisel (Diameter=25mm Carbide bits=9mm*12mm / embed) is made in Japan. It is product of Kondo stonemason's tools factory in Okazaki City, Aichi Pref known as a town of the stonemasons. This “Stone Chipping Chisel Diameter=25mm Carbide bits=9mm*12mm / embed” is a also blass brazing products. Yoji Kondo is the boss and the second of Kondo stonemason's tools factory, and he is an expert that has been worked for 50 years. He is known to Japanese craftsmen handling stones as one of stonemason's tools makers of carbide who are few in Japan now. His technique of brass brazing is highly valued because it is rare technique not only in the world but also in Japan.

The notes on use about Stone Chipping Chisel (D=25mm Bits=9mm*12mm, embed) [KONDO]

Please float Stone Chipping Chisel (Diameter=25mm Carbide bits=9mm*12mm, Brass brazing, embed), whenever you strike. If it continues striking, contacting, it will become a cause of a crack of carbide.