[KONDO] Stone Angle picking Chisel (D=19mm Bits=5mm*5mm, roll) [KMF090105]

It is a stone chisel for angle picking. It is used at the masonry work, architecture and gardening. Angle picking Chisel of this size (Diameter=19mm Carbide bits=5mm*5mm) becomes slightly small size also in lineup. The main uses are material processing, stone processing in a Japanese garden, etc. It is used at the spot which likes a coarse result. Since those by whom it is purchased probably regard the usage as it being good and knowing, detailed description is omitted, but the following points should be careful.

Please adjust an angle in Aoto of the GC whetstone 120H according to the stone to be used before beginning to use. When using it for soft stones, such as the Shirakawa stone and an Oya stone , it is about 60 degrees. In the case of granite, it is common to adjust to an obtuse angle rather than 55 degrees.

If you are a professional, the optimal SETTO for Angle picking Chisel (Diameter=19mm Carbide bits=5mm*5mm) of this size is a 0.8 kg thing. However, when there is little experience, please use SETTO lighter than this.

The main use
Stone angle picking
For Art (Sculpture), Architecture, Landscape design, Garden, Repair the ruins ,etc.

It will be necessity about 7 business day to send.

About a maker, Kondo Masonry tools factory (AICHI pref)

This Stone Angle picking Chisel (Diameter=19mm Carbide bits=5mm*5mm) is made in Japan. It is product of Kondo stonemason's tools factory in Okazaki City, Aichi Pref known as a town of the stonemasons. Yoji Kondo is the boss and the second of Kondo stonemason's tools factory, and he is an expert that has been worked for 50 years. He is known to Japanese craftsmen handling stones as one of stonemason's tools makers of carbide who are few in Japan now. His technique of brass brazing is highly valued because it is rare technique not only in the world but also in Japan.

The notes on use about Stone Angle picking Chisel (D=19mm Bits=5mm*5mm, roll) [KONDO]

Please float Stone Angle picking Chisel (Diameter=19mm Carbide bits=5mm*5mm), whenever you strike. If it continues striking, contacting, it will become a cause of a crack of carbide.