KANETAKA
-
Kiribashi 220mm (8.66inch) White paper steel, Kyoto style, Right hand, for Professional & General [KNT090302]
38,500JPY (not include VAT & TAX)
Low stock
* Can't use this scissors suddenly. If you don't know how to hold it, don't buy it. * If it is out …
-
Kiribashi 230mm (9.06inch) Blue paper steel, Kyoto style, Right hand, for Professional [KNT090301]
46,200JPY (not include VAT & TAX)
Not available
* Can't use this scissors suddenly. If you don't know how to hold it, don't buy it. * If it is out …
-
Wabasami 180mm (7.09 inch) White paper steel, Right hand, for General [KNT090201]
17,600JPY (not include VAT & TAX)
Low stock
* Other names for Wabasami are Warabite, Uekibasami, Kibasami, and Nanban. These have almost the sam…
-
Wabasami 215mm (8.46 inch) Blue paper steel, Kyoto style, Right hand, for Professional [KNT090101]
46,200JPY (not include VAT & TAX)
Low stock
* There are many points to note. Please be sure to understand that the high hardness blade is easy t…
-
[KANETAKA] Herb clip (Yasuki Yellow Paper steel, Black Finish) [KNT010101]
14,300JPY (not include VAT & TAX)
Not available
It is lovely "Herb clip" which carried out the form of Japanese traditional garden shears. Since ste…
-
[KANETAKA] Herb clip (Stainless steel) [KNT010102]
17,600JPY (not include VAT & TAX)
Not available
It is lovely "Herb clip" which carried out the form of Japanese traditional garden shears. The speci…
-
[KANETAKA] Ikenobo Shears (Full length 180mm, long edges) [KNT010201]
36,300JPY (not include VAT & TAX)
Stock:2
Ikenobo Shears (Full length 180mm, long edges)
-
[KANETAKA] Ikenobo Shears (Full length 165mm, long edges) [KNT010202]
33,000JPY (not include VAT & TAX)
Stock:2
Ikenobo Shears (Full length 165mm, long edges)
-
[KANETAKA] Ikenobo Pocket Shears (Full length 107mm) [KNT010203]
8,800JPY (not include VAT & TAX)
Not available
Ikenobo Pocket Shears (Full length 107mm)
-
[KANETAKA] Japanese Razor (Large, Lamination, Lamination, Stingray fin & Rattan winding, etc) [KNT020101]
77,000JPY (not include VAT & TAX)
Not available
This is the luxurious Japanese razor which made steel lamination and built it. It is a Japanese razo…
-
[KANETAKA] Japanese Razor (Left handed, Large, Lamination, Stingray fin & Rattan winding, etc) [KNT020101L]
110,000JPY (not include VAT & TAX)
Not available
This is the left handed edition. Please caution. (Now, the picture is right handed edition) This…
-
[KANETAKA] Japanese Razor (Large, Blue Paper steel, 57mm edge) [KNT020201]
33,000JPY (not include VAT & TAX)
Stock:3
57mm edge is the large size for a common Japanese. However, for persons with the large physique, suc…
-
[KANETAKA] Japanese Razor (1chogake, White Paper steel, 47mm edge) [KNT020202]
22,000JPY (not include VAT & TAX)
Stock:2
47mm edge is anormal size for a common Japanese. This size is called 1chogake in Japan. The professi…
-
[KANETAKA] Japanese Razor (2chogake, White Paper steel, 50mm edge) [KNT020203]
26,400JPY (not include VAT & TAX)
Stock:3
50-mm edge is a little big size for a common Japanese. This size is called 2chogake in Japan. The pr…
-
[KANETAKA] Pencil sharpener for drawing (righthand, White Paper steel, Black finish) [KNT030101]
7,700JPY (not include VAT & TAX)
Low stock
Pencil sharpener for drawing (righthand, White Paper steel, Black finish)
-
[KANETAKA] Pencil sharpener for drawing (lefthand, White Paper steel, Black finish) [KNT030102]
11,000JPY (not include VAT & TAX)
Stock:2
Pencil sharpener for drawing (lefthand, White Paper steel, Black finish)
-
[KANETAKA] Pencil sharpener for drawing (righthand, Blue Paper steel, Lamination) [KNT030201]
12,100JPY (not include VAT & TAX)
Stock:2
Pencil sharpener for drawing (righthand, Blue Paper steel, Lamination)
-
[KANETAKA] Pencil sharpener for drawing (lefthand, Blue Paper steel, Lamination) [KNT030202]
17,600JPY (not include VAT & TAX)
Stock:2
Pencil sharpener for drawing (lefthand, Blue Paper steel, Lamination)
-
[KANETAKA] Reeds Shaving tool (Blue Paper steel ,Double edge) [KNT040101]
13,200JPY (not include VAT & TAX)
Stock:2
The main use Shaving the lead of wind instrument A maximum of 14 days is required to ship. This…
-
[KANETAKA] Reeds Shaving tool (Blue Paper steel ,Single edge) [KNT040301]
14,300JPY (not include VAT & TAX)
Stock:2
The main use Shaving the lead of wind instrument. A maximum of 14 days is required to ship. Thi…
-
[KANETAKA] Reeds Shaving tool (Blue Paper steel ,Single edge, Left handed) [KNT040302]
16,500JPY (not include VAT & TAX)
Stock:2
The main use Shaving the lead of wind instrument. A maximum of 14 days is required to ship. Thi…
-
[KANETAKA] Reeds Shaving tool (White Paper steel, double edge) [KNT040102]
12,100JPY (not include VAT & TAX)
Stock:2
The main use Shaving the lead of wind instrument A maximum of 14 days is required to ship. This…
-
Haba Tori knives (1pair) [KNT120101]
17,600JPY (not include VAT & TAX)
Not available
This is an order item. We need a period of about several weeks to manufacture after ordering. By pl…
-
[KANETAKA] Ajikiri hocho (Blue Paper steel, 80mm edge) [KNT050101]
15,400JPY (not include VAT & TAX)
Low stock
Yasuki Blue paper steel is being used for this Ajikiri hocho. Blue paper steel is called Ao-Ko or Ao…
-
[KANETAKA] Ajikiri hocho (White Paper steel, 80mm edge) [KNT050102]
13,200JPY (not include VAT & TAX)
Low stock
Yasuki White paper steel is being used for this Ajikiri hocho. It is a kitchen knife for right-hande…
-
[KANETAKA] Ajikiri hocho (White Paper steel, 80mm edge, lefthand) [KNT050103]
17,600JPY (not include VAT & TAX)
Low stock
Yasuki White paper steel is being used for this Ajikiri hocho. It is a kitchen knife for left-handed…
-
[KANETAKA] Kiridashi (righthand, Blue Paper steel, lamination) [KNT080101]
37,000JPY (not include VAT & TAX)
Not available
Kiridashi (righthand, Blue Paper steel, lamination)
-
[KANETAKA] Kiridashi (righthand, Blue Paper steel, chain, lamination) [KNT080102]
37,000JPY (not include VAT & TAX)
Not available
Kiridashi (righthand, Blue Paper steel, chain, lamination)
-
[KANETAKA] Bamboo Kiridashi (righthand, White Paper steel) [KNT080103]
27,000JPY (not include VAT & TAX)
Not available
Bamboo Kiridashi (righthand, White Paper steel)
-
[KANETAKA] Kiridashi (lefthand, White Paper steel, Black Finish) [KNT080104]
18,000JPY (not include VAT & TAX)
Not available
Kiridashi (lefthand, White Paper steel, Black Finish)
-
[KANETAKA] Whirlpool Kiridashi (lefthand, Blue Paper steel) [KNT080105]
23,000JPY (not include VAT & TAX)
Not available
Whirlpool Kiridashi (lefthand, Blue Paper steel)
-
[KANETAKA] Fine Kiridashi (righthand, Blue Paper steel, chain) [KNT080106]
23,000JPY (not include VAT & TAX)
Not available
Fine Kiridashi (righthand, Blue Paper steel, chain)
-
[KANETAKA] Kiridashi (righthand, White Paper steel, Black Finish) [KNT080107]
16,000JPY (not include VAT & TAX)
Not available
Kiridashi (righthand, White Paper steel, Black Finish)
-
[KANETAKA] Cutting knife (righthand, White Paper steel, chian) [KNT090101]
9,000JPY (not include VAT & TAX)
Not available
Cutting knife (righthand, White Paper steel, chian)
-
[KANETAKA] Cutting knife (righthand, White Paper steel, Torsion design) [KNT090102]
4,500JPY (not include VAT & TAX)
Not available
Cutting knife (righthand, White Paper steel, Torsion design)
-
[KANETAKA] Shiragaki (righthand, Blue Paper steel, 6mm) [KNT070101]
7,000JPY (not include VAT & TAX)
Not available
Shiragaki (righthand, Blue Paper steel, 6mm)
-
[KANETAKA] Shiragaki (righthand, Blue Paper steel, 7.5mm) [KNT070102]
7,500JPY (not include VAT & TAX)
Not available
Shiragaki (righthand, Blue Paper steel, 7.5mm)
-
[KANETAKA] Shiragaki (righthand, Blue Paper steel, 9mm) [KNT070103]
8,000JPY (not include VAT & TAX)
Not available
Shiragaki (righthand, Blue Paper steel, 9mm)
-
[KANETAKA] Shiragaki (righthand, Blue Paper steel, chain, 12mm) [KNT070201]
15,000JPY (not include VAT & TAX)
Not available
Shiragaki (righthand, Blue Paper steel, chain, 12mm)
-
[KANETAKA] Shiragaki (righthand, Blue Paper steel, 6mm+7.5mm+9mm) [KNT070104]
21,000JPY (not include VAT & TAX)
Not available
Shiragaki (righthand, Blue Paper steel, 6mm+7.5mm+9mm)
-
[KANETAKA] #10000 Honzan Whetstone (for small & sharp edges, natural, with a table) [KNT060101]
88,000JPY (not include VAT & TAX)
Not available
#10000 Honzan Whetstone (for small & sharp edges, natural, with a table) Please use with NAKURA.
-
[KANETAKA] NAKURA [KNT060102]
3,300JPY (not include VAT & TAX)
Low stock
NAKURA. Please use with Honzan whetstone.
-
[KANETAKA] For small & sharp edges set (#10000 Honzan Whetstone & NAKURA) [KNT060103]
90,200JPY (not include VAT & TAX)
Not available
For small & sharp edges set (#10000 Honzan Whetstone & NAKURA)
-
[KANETAKA] Medium-rough Whetstone (artificial, #1000, for small or medium edges) [KNT060201]
4,400JPY (not include VAT & TAX)
Not available
Medium-rough Whetstone (artificial, #1000, for small or medium edges)
-
[KANETAKA] Medium-rough Whetstone (artificial, #1000, for medium or large edges) [KNT060202]
12,100JPY (not include VAT & TAX)
Stock:2
Medium-rough Whetstone (artificial, #1000, for medium or large edges)
-
[KANETAKA] Fine Whetstone (artificial, #4000, for small or medium edges) [KNT060301]
4,950JPY (not include VAT & TAX)
Stock:2
Fine Whetstone (artificial, #4000, for small or medium edges)
-
[KANETAKA] Fine Whetstone (artificial, #4000, for medium or large edges, with a table) [KNT060302]
9,900JPY (not include VAT & TAX)
Stock:2
Fine Whetstone (artificial, #4000, for medium or large edges, with a table)
-
Blacksmith's hammer 0.8kg head [KNT910101]
28,600JPY (not include VAT & TAX)
Not available
This is a Japanese blacksmith's hammer. Head weight is 800g (There is a tolerance for the handmade).…
-
Blacksmith's hammer 1.0kg head [KNT910102]
29,700JPY (not include VAT & TAX)
Not available
This is a Japanese blacksmith's hammer. Head weight is 1000g (There is a tolerance for the handmade)…
-
Blacksmith's hammer 1.2kg head [KNT910103]
30,800JPY (not include VAT & TAX)
Not available
This is a Japanese blacksmith's hammer. Head weight is 1200g (There is a tolerance for the handmade)…
-
Blacksmith's tong (The mouth of the Crow) [KNT920101]
15,400JPY (not include VAT & TAX)
Not available
This is a Japanese blacksmith's tong. The shape of the tong has a similar to the mouth of the crow. …
-
Blacksmith's tong (Flat) [KNT920102]
13,200JPY (not include VAT & TAX)
Not available
This is a Japanese blacksmith's tong. The shape of the tong has a flat. You can grip easily for flat…
-
Dried bonito cutting tool [KNT100101]
26,400JPY (not include VAT & TAX)
Not available
This is a necessary tool to cut the dried bonito in Japanese cuisine. This product made by KANETAKA…
A store and a factory are in front of the head family of the flower arrangement "Ikenobo". KANETAKA is a long-established store of seven generation at 200 years. Mr. Kazuhiro Yamada of the eldest son has inherited Master of sharpen, and Mr. Yoshitaka Yamada of the second son has inherited as the blacksmith craftsman.
KANETAKA makes Traditional products, such as a Japanese razor, the Ikenobo scissors, etc.
In addition to them, idea goods, such as a herb clip, a pencil sharpener for sketches, and a knife that deletes the reed of a wind instrument, are also produced.